FAQ
How do I set up my Wi-Fi modem?
Starter Kit The box contains the following items: The Wi-Fi modem (CODA-4680 or CODA-5610Q for the 500 Mbps plan and above) A coaxial cable A power cord An ethernet cable The ethernet cable is included in the box with your modem, but it is not required to set up your Wi-Fi network. Connect the coaxial cable The coaxial cable must be properly screwed in on both ends. Connect the power cord The power cord must be properly connected to the Wi-Fi modem and wall outlet (avoid using a power strip). IMPORTANT: Once it’s plugged in, your Wi-Fi modem will make its first system update, and may need to reboot after roughly 15 minutes. Make sure your modem is ready A series of lights will appear on your modem. Make sure they match this image. Write down your modem’s info Locate the network name (Default Wi-Fi Network) and password (Default Key) printed on the back of your Wi-Fi modem: CODA-4680 model: look at the back. CODA-5610Q model: look under. Make sure not to confuse similar characters such as O and 0, as well as I and 1. Before proceeding to the next step, check the available networks on a Wi-Fi-enabled device like a mobile phone and check that the FIZZ network name as indicated on your modem appears in the list of available networks. This may take a few minutes. Configure your modem Select the name of your Wi-Fi network from the list of networks available to your Wi-Fi enabled device and enter the password. Your Web browser will open*. You will be redirected to the "Easy Connect" interface. Follow the on-screen steps. *You may need to open your Web browser manually. To change the name of your network: Open your browser and enter 192.168.0.1 in the address bar. Use these